Product Center

RX100

ZISA RX100

WDM Optical Receiver Instructions

1. Introduction

Fiber to the home ( FTTH ) broadband access is the ultimate development goal, RX100 optical receiver is the target terminal products for this goal. RX100 device adopts technology of high isolation WDM in order to separate CATV and ONU signal. Further more, it also adopts low optical power receiving and RF-AGC control technique, which could achieve the requirement of ≤-9dBm CATV receiving for FTTH. The optical power receiving monitoring indicator LED ( ≥-15dBm) is provided on the pane and it supports RF outputs constantly , convenience of customers use, which is the ideal receiver equipment for FTTH.

2. Main Performance Parameters

Item

Unit

Performance Parameter

Optical  characteristic

input wavelength

(nm)

1310,1490,1550

Output wavelength

(nm)

1310,1490

operation wavelength

(nm)

1540~1560

channel separation

(dB)

≥40(1310/1490nm and 1550nm )

response

(A/W)

≥0.9

receive power range

(dBm)

+2~-15

reflection loss

(dB)

≥55

fiber linker

/

SC/APC

RF characteristic

Bandwidth/flatness

MHz/dB

47-1000/≤±1

output level

dBuv

AGC: 78±1/(-2~--12dBm)

output level adjustment

dBm

0~-18

reflection loss

dB

≥14(75Ω characteristic impedance)

RF output interface

/

Metric (two way output)

CNR/MER

dB

≥44/34(PAL-D 60CH,OMI3.8%,-9dBm)

CTB/CSO/HUM

dB

≥65/≥60/≥60(-1dBm receive)

Other requirement

power supply/consumption

V/W

External AC100~240V→DC12/5

working/storage temperature

-35~50/-40~75(humidity 5~90%)

size

mm

130×60×22

3. Direction for Use

3.1 Power Input

POWER IN:RX100 is the external power supply input port, First should be the DC+12 V external voltage stabilizer output line connected to the device POWER IN,than put DC+12V external mano-stat insert 100/240 V,DC12V Face posted power light, show power part is regularly working.

3.2 Optical Fiber Input

OPTICAL IN:RX100 is input interface of optical signal,in optical access should clean APC TOP by alcohol ,than align adapter sunken mouth, fiber mouth march link;when optical signal accesses (≥-15dBm) then lights on in panel, which shows optical part is regularly working;lights will be changed by receive power as yellow(>2dBm), green(2~-12dBm) and red (<-12dBm).ONU is 1490/1310nm connection interface, please do not take off the cover before you use.

3.3 RF Output Level Adjustment

RF OUT:RX100 is RF output port,when optical input -2~-12dBm,RF output 78dBuv±1;ADJ:it is RF Output level attenuator, default value is the minimum.When the output level and the design requirements has any deviation, it can adjust the attenuation amount, with the design requirements.This device is low optical power receive, suggest -12 ~ -9 dBm advisable.

4. Install Test Matter Need Attention

4.1.RX100 device is indoor type structure,Not to be used in place of harassment by the rain;Packed in the box of the indoor appropriate space,For cooling;The output of the cable shielding network must be grounded,Grounding resistance should be less than 4 Ω,The local power supply for electrical shell has to be grounded,Above ground resistance.

4.2.Tail fiber input and output cable has to be reserved certain length,Reduce accident’s occurrence; optical interface do not move if not use, RX100 device is with SC/APC,do not link with SC/UPC.

5. Attachment

RX100 Outlay power supply, AC100~240V  DC12V  500mA  1 PCS.

Product Detail,ZISA-Communication Never Stops,ZISA, Communication Never Stops!

Product Detail-ZISA-Communication Never Stops

Product Detail,ZISA-Communication Never Stops