Product Center

FTTDP ONT

 ZISA FTTDP ONT

FTTDP ONT is one of the ideal solutions to provide broadband access, where FTTH is impossible. It can provide users with broadband Internet access capability, high quality voice & video service

  • ITU G.984.x GPON port with 1.244Gbps/2.488Gbps link speed
  • 1x RJ11 VDSL2 provide up to 250Mbps wirespeed
  • 1x 10/100/1000BASE-T Ethernet RJ45 Ports (optional)
  • Reverse powered by VDSL2 CPE
  • Provide local 12V DC connector port for installation benifit
  • -25 to 55℃ operating ambient temperature
  • Fiber to the distribution point

Standards

 Compliant with ITU-T G.984.x (G.984.5 support)

 Compliant with SFF-8472

 Compliant with FCC 47 CFR Part 15, Class B

 Compliant with FDA 21 CFR 1040.10 & 1040.11, Class I

 Compliant with ITU G.993.2

 Compliant with IEEE 802.3 Ethernet

 Compliant with ITU-T G.984.2 Amd1, Class B+

 Compliant with 802.1 q/p VLANs

 Compliant with CE regulatory

Specifications

Overview

Type

FTTDP SFU device

Main Chip

PEF98010+PEF88300

Uplink

GPON

Downlink

1x VDSL2 + 1x GE(optional)

Operating Temperature

-25 ~ 55℃

Operating Humidity

5%~95%,non condensing

Dimension

135x90x40mm

Installation

Wall mounting

Weight

About 1Kg

Regulatory

CE

Layer2 Bridging

Standard

Compliant with IEEE 802.1d, 802.1p, 802.1q

VLAN

Support SSID to VLAN mapping Support 802.1p, 802.1d, 802.1q based QoS Support forwarding traffic class into GEMPORT & TCONT Support ingress/egress 802.1p tag based Qos on each port Support double tagging

MTU

Support 2000byte MTU MTU length is configurable

PPP

Support PPP associated with IETF RFCs 1332,1334,1661,1887 e 1994 Support PPP encapsulated over Ethernet Support PPP pass through

OAM, Security, Application

Management

Support OMCI, Web GUI, CLI

Upgrading

Support firmware upgrade via remote server

Image Rollback

Hold a working image & a alternative image for image rollback

Restore Default

 

1. Press a hidden button for more than 10s to restore factory default

2. Use GUI Web, CLI, Telnet method to restore factory default

 

GPON uplink

Interface

1x SC/APC connector, single mode fiber

Standard

Compliant with ITU G.984.2 Class B+ Compliant with ITU G.984.5 Compliant with FDA 21 CFR 1040.10 and 1040.11 Compliant with laser safety standard IEC-60825 Class I Compliant with SFF-8472

Transmitter

DFB transmitter working in 1310nm, with >10dB Extinction Ratio Mean launch power in 0.5~5dBm range Turn on/off time at burst mode < 12.8ns

Receiver

APD receiver working in 1490nm, with -8 ~ -28dBm working range Isolation to 1310nm > 47dB Isolation to (1440~1450nm), (1530~1540nm) > 25dB Isolation to (1400~1440nm), (1540~1625nm) > 40dB

Bandwidth

Up: 1244.16Mbps / Down: 2488.32Mbps

TCONT

Support type 1~5 TCONT defined in G.984.3 Support 32 TCONT, simultaneously

GEMPORT

Support 256 GEMPORT Support flexible mapping between TCONT & GEMPORT

VDSL2

Interface

1x RJ11

Standard

Compliant with ITU G.993.2 Back compliant with VDSL

Performance

Support VDSL2 17a、30a profile Max bandwidth 250Mbps

Ethernet LAN(optional)

Interface

1x RJ45 connector

Standard

Compliant with IEEE 802.3, 802.3u, 802.3ab Compliant with IEEE 802.3az, Green Ethernet

Link

Support Half-duplex & full-duplex operation Support 10/100/1000Mbps auto-negotiation Support MDI/MDIX auto detection

Power Solution

 

Type

Reverse power + local DC (for installation)

Reverse power

VDC 57V on RJ11 UTP cable Max consumption < 10W

Local DC

12V 1A max

Compliance

 

Regulatory

CE compliant

EMC/EMI

Compliant with EN 55022, class B Compliant with EN 300 386 Compliant with EN 61000-4-1~5

Safety

Compliant with IEC 60950

ENV kindness

Compliant with RoHS standard Compliant with WEEE standard Compliant with energy efficiency level V Compliant with CoC V4

   
Product Detail,ZISA-Communication Never Stops,ZISA, Communication Never Stops!

Product Detail-ZISA-Communication Never Stops

Product Detail,ZISA-Communication Never Stops